Defining of printing plate quality level through introduction of different image analysis applications

diplomski rad

• Autor: Jelena Poljak
• Mentor: Sanja Mahović Poljaček (mentor)
• Član povjerenstva: Sanja Mahović Poljaček (član povjerenstva)
• Ustanova koja je dodijelila akademski / stručni stupanj: Sveučilište u Zagrebu; Grafički fakultet; Zagreb
• Datum i država obrane: 2013-9-10, Hrvatska
• Znanstveno / umjetničko područje, polje i grana: TEHNIČKE ZNANOSTI; Grafička tehnologija

Sažetak (engleski)

Printing plate is carrier of an image which will be print out and multiply in the

reproduction process. It consists of surfaces which will, by using a printing ink,

transfer the digitally made image onto the printing substrate. Quality of the

image and final imprint depend on a number of parameters which have to be

monitored and adjusted during the printing plate making and reproduction

processes.

Quality control of printing plate can be conducted by observing the printing

areas, made of photosensitive layer; or by observing the non-printing areas,

made of aluminium-oxide. Quality of the image on the printing plate surface is

usually controlled by using different devices for measuring the quality level of

plates. These devices work on the principle of determining several parameters

for monitoring the quality of printing plates, where, the most significant is, the

surface coverage of the printing elements.

Beside those devices, market today offers a range of alternative methods which

allow the determination and characterization of tones by using a software

support for image analysis. Those methods are using the microscopic images of

the surface and can define the surface coverage of printing elements and other

necessary information about the quality of the printing plate.

The aim of this work is the defining of printing plate quality level through

introduction of different image analysis applications. The results of this research

may indicate that it is also possible to use alternative applications for monitoring

the quality of the printing plates. Furthermore, this paper would provide a

general overview of quality control possibilities for printing plates and could be

useful to the systems where such controls are regularly conducted.

• Ključne riječi: tiskovna forma; kontrola kvalitete
• Ključne riječi (engleski): printing plate; quality control; image analysis applications
• Jezik: hrvatski
• URN:NBN: urn:nbn:hr:216:208721
• Studijski program: Naziv: Grafička tehnologija; smjerovi: Tehničko-tehnološki, Dizajn grafičkih proizvoda; Smjer: Tehničko-tehnološki; Vrsta studija: sveučilišni; Stupanj studija: diplomski; Akademski / stručni naziv: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (univ. mag. ing. techn. graph.)
• Vrsta resursa: Tekst
• Način izrade datoteke: Izvorno digitalna
• Prava pristupa: Otvoreni pristup
• Datum i vrijeme pohrane: 2024-04-18 19:44:23