Utjecaj različitih konstrukcija MEMS inkjet glava na kvalitetu reprodukcije

master's thesis

• Author: Maša Božanić
• Mentor: Igor Majnarić (mentor)
• Committee member: Damir Modrić (član povjerenstva)
• Committee member: Igor Majnarić (član povjerenstva)
• Committee member: Sonja Jamnicki Hanzer (član povjerenstva)
• Granter: University of Zagreb; Faculty of Graphic Arts; Zagreb
• Defense date and country: 2015-7-17, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Graphic Technology

Abstract

U ovom radu ispitano je kako multipliciranje ispisnih glava utječe na kvalitetu kolorne reprodukcije. Pritom će se ispitivati otisci dva Durstova UV Inkjet printera: modela Rho 512 i modela Omega 2 koji koriste dvije vrste inkjet boja: UV inkjet boju (Rho Roll) i UV LED boju (Omega Ink). U istraživanju se koristio ofsetni otisak kao referentni otisak. Dobiveni otisci kolorimetrijski su mjereni sa spektrofotometrom x-rite eXact te analizirani korištenjem mikroskopa Leice DM 2500. Sustav za slikovnu analizu Personal IAS korišten je za detaljnu analizu tiskovnih elemenata. Pritom je izvršeno mjerenje cirkularnosti, promjera rasterskih elemenata, početnog i završnog zamućenja, širine linije te distribuciju otisnutih rasterskih točkica. Rezultati pokazuju da manje ispisne glave mogu ostvariti veću kvalitetu otiska. Takvi otisci su oštriji, imaju manje satelitskih kapljica i promjer rasterskih elemenata je manji. Najbolja kvaliteta otiska postiže se na stroju Durst Omega 2 u žutoj boji gdje su najveće osilacije u veličini rasterskih elemenata u odnosu na Durst Rho 512 (d Omega-Rho_30% RTV = 40,18).

Abstract (english)

Today's Inkjet printing technology allows commercial printing from one copy to several thousands of copies. This is greatly affected by a single parameter, the size of the

printhead. MEMS Inkjet technology enables the installation of a large number of nozzles in the printhead that provides larger print width and higher productivity. The aim was to

investigate whether the modular stacking of smaller heads into a larger has influence on the future quality of inkjet prints and whether any anomalies arise on the print.

In this paper it was tested how the multiplication of printheads affects the quality of colour reproduction. Tested prints were printed on two Durst's UV inkjet printers: the model Rho 512 and model Omega 2. Two types of inkjet color were used: UV Inkjet color (Rho Roll)

and UV LED color (Omega Ink). Offset print was used in the experiment as a reference. Obtained colorimetric prints were measured with a spectrophotometer X-Rite eXact and

using the Leica DM 2500. The system for image analysis Personal IAS was used to measure the circularity, the diameter of the raster dots, beginning and ending blur, line

width and the distribution of printed raster dots. Smaller printheads can achieve prints with higher quality. These prints are sharper, have less satellite droplets and the diameter of the screen elements is smaller. The best image quality is achieved on the machine Durst Omega 2 in yellow where there is the greatest oscillation in the size of screen elements in relation to the Durst Rho 512 (d Omega-Rho_30 RTV = 40.18%).

• Keywords: Inkjet; MEMS tehnologija; ispisna glava; ofsetni otisak
• Keywords (english): Inkjet; MEMS technology; printhead; offset print
• Language: croatian
• URN:NBN: urn:nbn:hr:216:547178
• Study programme: Title: Graphic technology; specializations in: Graphic technology, Design of graphic products; Course: Graphic technology; Study programme type: university; Study level: graduate; Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije (sveučilišni/a magistar/magistra inženjer/inženjerka grafičke tehnologije)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2024-04-18 20:41:02